|
Model-Stone
material is heat-resistant but we need to use either
a wooden or a plastic mat in order to avoid scratching
the surface. Any damage can be generally repaired. Anyway,
we can avoid taking risks by following some advice:
- Do not expose strong chemical products such as solvents,
oven-cleaners… if so, rinse it out quickly with water.
- Polish stains must be taken away with polish remover,
but be careful that it doesn’t contain acetone. Rinse
it out after with water.
- Do not cut directly on the Model-Stone
material. Use a specific surface.
- Do not expose pots or pans directly on the Model-Stone
surface.
|
|
Scratches,
cuts and scalds are unavoidable to appear on a product
used day by day. But Model-Stone is
a strong surface, with no pores and so very easy to
make it retrieve its original appearance.
Any superficial scratch, stain, scald or blow can be
repaired in-situ. We only need to clean the zone with
a light abrasive and a sponge. If it is not a superficial
damage, we should polish the zone carefully.
|
